Repair or replacement of parts ensures Raymond mills work properly

To ensure Raymond mills work properly,we should pay attention to repair and replace parts of the mills.

The production bottleneck of the Raymond grinding process is mainly: blade angle problem, sealing problem of the roller assembly and wear of the wearing parts. First, the Raymond sharpening blade's angle plays a crucial role. Some Raymond mill manufacturers tend to ignore this problem. The Raymond sharpening insert has a high and low position, which makes the blade shovel unable to accurately transfer material to the grinding position, which greatly affects the production of Raymond mill. Secondly, the sealing problem of the roller assembly is directly related to the normal use and normal use of the Raymond mill. If the Raymond roller assembly is not effectively sealed, the assembly can easily enter the powder. After feeding the powder, the overall performance of the Raymond mill is easily broken and often broken down, which will bring a lot of normal production. Serious trouble. It is the wear resistance of consumables. If the wearing parts (ie grinding rolls and grinding rings) are made of plain carbon steel, they will wear out quickly, so the production cost of the Raymond mill manufacturer will increase the repair rate will also increase.

Due to the special use environment, it is necessary to carry out anti-corrosion treatment in time before use and during use. In the material selection of the Raymond mill design stage, the medium environment is considered, and the material is required to have good adaptability, corrosion resistance and heat preservation.

In the design of the Raymond mill structure, the weld should be minimized to prevent corrosion after infiltration. Raymond Mill's production stage also focuses on anti-corrosion work. Check the mechanical materials and register. It is necessary to pay full attention to the anti-corrosion work of the Reed mill, especially the strict control of design specifications and design quality.

When the Raymond mill is damaged, the repair or replacement of the parts ensures that the Raymond mill works properly, that is, the economic benefits are improved under low-cost maintenance. Then, the necessary maintenance work of Raymond Mill can keep it in good working condition and extend the service life of Raymond Mill.

Different types of Raymond mill have different spindle refueling methods, which can be generally divided into two types. One is to add oil to the oil. So what are the two ways to add fuel? First, let's talk about the addition of oil. Typically, this refueling method has an oil cup on the center shaft. This machine is equipped with a certain amount of oil, which can meet the lubrication requirements of the copper sleeve and the central large shaft bottom bearing. But the addition of butter is different. Part of the butter is under the plum frame. There is a screw hole in the upper part of the blade. This screw hole is used to add butter. You only need to take the screw when you add it. You can add it when dragging and dropping. Of course, the bottom bearing also needs to be buttered, which is connected to the bearing portion of the Raymond mill through a filler pipe.

As a professional manufacturer of grinding mills, Shuguang Heavy Machinery sells a variety of different types of mill equipment, including ball mills, Raymond mills, vertical mills, etc.Welcome to contact us for more details.

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City

Contact number: +86-371-67666660 676667

Mobile phone: 0086 13523465141

After-sales Service Department: 0371-67666667