Introduction:

The impact crusher (reverse blow) can process various coarse, medium and fine materials ores, rocks (granite, limestone, concrete, etc.) with a particle size of not more than 120-500 mm and a compressive strength of not more than 320 MPa. Hydropower, highways, artificial sand and gravel, crushing and other industries. This series of impact crushing structure is unique, equipped with high chrome plate hammer and unique counter-attack lining; suitable for hard rock crushing, high efficiency and energy saving; adjustable grain size, which can simplify the crushing process, and has large crushing ratio and high crushing efficiency. The product has the advantages of cube shape and selective crushing.

Working principle:

The impact crusher is a crushing machine that uses impact energy to break up materials. When the machine is working, the rotor rotates at a high speed under the driving of the motor. When the material enters the action area of the hammer, it collides with the hammer on the rotor, and then is thrown to the counter-attack device to break again, and then from the counter-liner. The spring is returned to the action area of the hammer and re-crushed. This process is repeated. The material is broken into the first, second and third, counter-attack chambers from large to small, until the material is crushed to the required particle size and discharged from the discharge port. Adjusting the gap between the counter frame and the rotor can achieve the purpose of changing the material discharge size and material shape.

Technical Data: