The range of the Calcspar grinding fineness

Calcspar Raymond millis the most commonly used grinding equipment in milling equipment. In the process of production, it will encounter various problems. Some users will consult our mill equipment for the fineness. How to achieve the required high fineness powder? As a professional manufacturer of calcite micro-grinding, I will give you a detailed introduction below.

Different material grinding materials, grinding fineness is also different, can control the material feeding speed to control the milling powder output, insufficient material; the influence of the range of the grinding fineness; the fan flow size, the air volume is larger, thicker In contrast, smaller grain sizes can affect the fineness and yield of the mill.

During the grinding process, if the hardness of the material is large, the fineness of the material will be larger. If the micro-grinding is too much during the working process, the throttle valve will be blocked, so that the output will decrease. If the material is too small, the wind will be too large and the grinding fineness will be larger. Therefore, it is necessary to grasp the size of the feed pellet to produce the best fineness. Another reason is the fan, which causes the adjustment of the fan volume of the large grinding fineness, but the size is good. Therefore, if the Raymond grinding equipment is not standard, it can be adjusted by a fan.

There are a variety of micro-grinding models. If the finished product has a fineness of less than 425 mesh, it can be finished with ultra-fine micro-grinding. The finest can reach about 3000 mesh. It is better to choose suitable equipment for different fineness ranges, and

Calcspar

powder of 500 mesh or more. It can be selected by different types of ultra-fine grinding. The higher the fineness requirement, the lower the output. The choice of mill model needs to be selected according to the specifications of the finished product. Moreover, the ultra-fine mill can be arbitrarily adjusted between 300-3000 mesh. For those ultra-fine mills that you are interested in or want to know, you can call

0086-13523465141

for consultation.

E-mail : shuguangzhongji@163.com

Cel : 0086-13523465141