How to avoid wear of sand making machine parts

Industrial mine sand making machines work in open air all year round. After severe vibration and operation, some parts and components will be deformed and worn during the working process.In order to ensure the normal and stable operation of the sand making machine, it is necessary to avoid finding ways to avoid the wear of parts, and to replace the worn parts in time to prevent affecting production operations.

The wearing parts and accessories of the sand making machine mainly include impeller mouth guard ring, bearing, motor pulley, V-belt, plate hammer, counterattack liner, empty impeller, main shaft and so on. The use time of these parts depends on whether the customer's repair work is in place, and it is necessary to carefully inspect and repair after three to five months of use.If it is found to be worn or worn, it should be recorded in time to avoid accidents and the measures are not enough. Some accessories should be repaired or replaced according to the production situation.Among them, the wear failure time of the blow bar is relatively short, and the repair cost is quite high.

Therefore, the first to solve the problem of high-efficiency wear is to reduce the wear of the blow hammer. The analysis is mainly from the following aspects:

1. The high-efficiency processing capacity of the sand making machine has a certain impact on the wear of the blow hammer. When the processing capacity increases, the product particle size will become coarser, the crushing ratio will decrease, and the unit loss rate of the hammer will also increase; changing the size of the discharge gap can also change the thickness of the product particle size to a certain extent. Hammer wear also has a certain effect.

2. The material to be crushed has an important impact on the wear of the hammer, including factors such as material hardness, feed size and water content. The hardness of the material has a greater impact. For different crushed materials, different sand making machines should be selected.

3. The influence of speed. The linear speed directly affects the impact energy and the crushing ratio of the impact energy applied by the plate hammer to the material, and plays a decisive role in the particle size of the product.

The above are the effective methods provided by shuguang machinery to avoid the wear of sand making machine parts, and hope to help your production.

As a supplier with nearly 30 years' manufacturing, Shuguang Heavy Machinery also produces and sells hammer crushers, impact crushers, vertical shaft crushers, cone crushers, compound crushers, Raymond mills, high pressure mills,powder machine, vertical mill, ultra-fine grinding machine, ball mill, double-shaft shredder and other heavy equipment crusher. Feel free to contact us for more details.

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City

Contact number: 0086-371-67666667、67666660

Mobile phone: 0086-13523465141

E-mail:Admin@sgzgchina.com