What are the feeding methods of the mobile crushing station

The feeding method of the mobile crushing station has a relatively large impact on the working process of the equipment. The feeding method needs to be selected according to the processing requirements of the equipment. The correct feeding method can ensure that the equipment production process is unimpeded, otherwise various failures are prone to occur. The different feeding methods of mobile crushing stations have a greater impact on production efficiency. Let's introduce in detail which feeding methods are available in mobile crushing stations.

1. Mechanical

There is an adjusting nut on the upper end of the main shaft of the mobile crushing station. When the adjusting nut is rotated, the crushing cone can be lowered or raised, so that the discharge port will become larger or smaller. The adjustment process is very convenient. In addition, when the equipment is overloaded, it is cut off. The safety pin on the drive pulley to realize the safety function;

2. Hydraulic

The main shaft of the mobile crushing station is located on the plunger in the hydraulic cylinder. Changing the volume of hydraulic oil under the plunger can change the upper and lower positions of the crushing cone, thereby changing the size of the discharge port. This adjustment method is also very convenient. , When the equipment is overloaded, the downward pressure of the main shaft increases, forcing the hydraulic oil under the plunger to enter the accumulator in the hydraulic transmission system, so that the crushing cone descends to increase the discharge port.Discharge the non-crushed material that enters the crushing cavity with the material to realize the insurance effect;

The mobile crushing station has its own safety device, which can reduce the frequency of failures during the work process, and has high safety performance. At the same time, this also greatly reduces the maintenance engineering of failures in equipment production, liberating labor, and saving maintenance. However, as the production progresses, the device of the machine must be improved to better meet the changing needs of the market, so as to ensure better production.

Through the introduction of the feeding method of the mobile crushing station in this article, and the realization of the protection of the equipment by different feeding methods, we can choose according to the actual situation of the user and choose the correct feeding method.It can reduce the failure rate of the equipment, prolong the service life and improve the production efficiency.

As a supplier with nearly 30 years' manufacturing, Shuguang Heavy Machinery also produces and sells hammer crushers, impact crushers, vertical shaft crushers, cone crushers, compound crushers, Raymond mills, high pressure mills,powder machine, vertical mill, ultra-fine grinding machine, ball mill, double-shaft shredder and other heavy equipment crusher. Feel free to contact us for more details.

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City

Contact number: 0086-371-67666667、67666660

Mobile phone: 0086-13523465141

E-mail:Admin@sgzgchina.com