Techniques for limestone mobile crushing plant maintenance

Limestone mobile crushing plant is a kind of mobile crushing equipment that is quite convenient and efficient in use. For most of the crushing equipment, daily maintenance is more important, then the maintenance of the limestone mobile crushing plant is also important. Proper and timely maintenance will also make the mobile crushing plant more productive.

Maintenance method of limestone mobile crushing plant

1. Check machine wear regularly

Regularly check the wear of the internal parts of the machine, such as the degree of wear of the central feed pipe, cone cap, impeller upper and lower runner liner, circumferential guard plate, jaw plate. If the wear is serious, it must be repaired or replaced in time. The weight, model and size of the components must be replaced according to the original component parameters.

2. Do a good job of lubrication

Always pay attention to and do a good job of lubricating the friction surface in time, and the grease used should be determined according to the location and temperature conditions used. In general, calcium-based, sodium-based and calcium-sodium-based greases are used; when adding grease The raceway of the roller bearing should be cleaned with clean gasoline or kerosene before adding it. The grease added to the bearing housing should be about 50% of its space volume, and it should be replaced every 3 to 6 months to ensure that The normal operation of the machine extends the service life.

3. Keep the equipment clean

Always keep the equipment clean, so that there is no dust accumulation, no oil pollution, no oil leakage, no water leakage, no electricity leakage, no ash leakage, and it should be noted that dust and other debris should not enter the lubrication system and lubrication parts, because these debris not only It will damage the lubricating oil film, and will cause the equipment to lose lubrication, increase wear and shorten the service life of the equipment; in particular, pay attention to the regular cleaning of the bearings. After 2000 hours of the crusher, open the main shaft assembly to clean the bearings, generally 7200 Replace the new bearing after hours.

Zhengzhou Shuguang Heavy Machinery has been focusing on the production of mining machinery and equipment for more than 20 years. There are many types of mobile crushing stations and complete conventional models. In addition, it also provides professional customization to meet the different production needs of users. Welcome to contact us.

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City

Contact number: +86-371-67666660 676667

Mobile phone: 0086 13523465141

After-sales Service Department: 0371-67666667