3 roller Raymond mill operation process

上一篇 Industry News 下一篇
Release time:2020-03-20

If you are looking for related products or have any other questions, you can call the company service hotline at any time, or click the button below to communicate with us online!

Before starting the 3 roller Raymond mill, check whether all maintenance doors are closed tightly, check whether the gap between the screed plate of the crusher meets the size of the feed particle size, and adjust the speed of the analyzer to approximate the particle size of the finished product. Boot in order
1. Start the bucket elevator;

2. Start the jaw crusher;

3. After the material is stored in the silo, start the analyzer;

4. Start the blower (start at no load, load it after normal operation);

5. Start the 3 roller Raymond mill main machine, and immediately start the electromagnetic vibration feeder immediately after starting the main machine. At this point, the Raymond grinding operation is started.
The operation sequence of 3 roller Raymond mill is simple as follows: Start-up: hoist → crusher → analyzer → fan → host → feeder.

When the 3 roller Raymond mill is stopped, the machines should be shut down in the following order:

1. Close the feeder first and stop feeding;

2. Stop the host after about one minute;

3. Stop the blower after blowing the remaining powder;

4. Close the analyzer afterwards.

3 roller Raymond mill shutdown sequence is: feeder → host → blower → analyzer.

Note: After the hoist conveys a certain amount of material to the silo, stop the crusher first and then stop lifting. This item should be changed by the current storage amount.

5.Raymond mill is not allowed to refuel at random during normal work. To ensure production safety, abnormal noise occurs in any part of the mill, or the load suddenly increases, the machine should be shut down and checked immediately to eliminate failures to avoid major accidents. When you continue to start the machine, you must remove the remaining material in the mill, otherwise the current is too large when the machine is started, which affects the startup.

As a professional manufacturer of grinding mills, Shuguang Heavy Machinery sells a variety of different types of mill equipment, including ball mills, Raymond mills, vertical mills, etc.Welcome to contact us for more details.

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667

zhengzhou shuguang heavy machinery Co.,Ltd





Address:No. 19, Longjiang West Road, Shangjie District Zhengzhou City