Maintenance of grinding mill blower

Blower has a great impact on the efficiency and quality of the

, so in order to ensure the efficiency and quality of the machine, it is necessary to ensure the smooth operation of the blower, so it needs to be maintained reasonably in use. Here is to introduce its maintenance measures.

We know that when the grinding mill is in use, its internal parts, especially the core parts, need to be maintained and operated. Maintenance is to ensure the smooth operation of the equipment, as well as its service life, thus ensuring the efficiency and quality of production. Among them, the blower which has an important impact on the efficiency and quality of the grinding mill is the blower. To say, the maintenance work is the most important thing when the equipment is in use. Here is to introduce the maintenance operation of the blower.

1. Before the grinding mill is used, all parts of the grinding mill need to be inspected, such as the fastening condition of the fasteners. At this time, we should pay attention to check whether the positioning pin of the blower is loosened or not. In some cases, we need to tighten in time to prevent the unstable phenomenon of the blower in the production of equipment.

2. Check whether there is water leakage or oil leakage inside the blower body. If there is any, timely treatment is needed to prevent water leakage or oil leakage, which will have adverse effects on production. In the use of the grinding mill, attention should be paid to whether there are scaling, rusting or peeling phenomena inside the blower. Some words need to be dealt with in time to ensure the working state of the blower.

3. In the process of grinding material, we should pay attention to observe the quality of lubricating oil and cooling condition. We should also pay attention to whether the blower runs with murmurs. If there are murmurs, we need to stop and check. In addition, when using the grinding mill, we must pay attention to preventing the phenomenon of blower overload, by paying attention to the incoming. The growth trend of exhaust pressure, bearing temperature and motor current can be observed to determine whether the equipment is in normal operation.

4. When the grinding mill is in operation, it is necessary to remove and clean the blower every other time. At this time, it is necessary to measure the size of each component and make a good record to ensure that the original matching requirements are maintained after assembly. In addition, the blower of the grinding mill should be timely corrected after new installation or overhaul. The oil tank is cleaned and put into operation in strict accordance with the use steps.

Although the blower is only a part of the grinding mill, it plays a greater role in the operation of the equipment, so when the equipment is used, the maintenance of the blower should be done to ensure its working status and smooth operation of the equipment.

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City

Contact number: +86-371-67666660 676667

Mobile phone: 0086 13523465141

After-sales Service Department: 0371-67666667