What is the baryte mill machine

Baryte can be used as a white pigment, as a cement for radioshields, as well as for chemical, paper, textile fillers, which acts as a flux and increases the brightness of the glass in glass production. However, it is mainly used as a weighting agent in the drilling industry and refining cesium. baryte is mainly used in petroleum, chemical, paint, filler and other industrial sectors, of which 80 to 90% is used as a mud weighting agent in oil drilling.

The baryte used for drilling mud should have a fineness of more than 325 mesh. If the baryte is not fine enough, it will precipitate easily. Adding baryte powder to oil and gas drilling mud is an effective measure to increase the specific gravity of mud. It can balance the weight of mud with the pressure of underground oil and gas to avoid the occurrence of blowout accidents.

Adding an appropriate amount of baryte powder to the cement raw meal using coal gangue as raw material can greatly improve the cement strength of the clinker saturation ratio, especially the early strength, which is the comprehensive utilization of coal gangue for production. Low calcium, energy saving, early strength and high strength cement provide a beneficial way.

The deep processing of baryte is mainly the grinding of granular baryte by Raymond mill. The baryte mill machine is a new generation of milling equipment based on the traditional mill. It is a more commonly used industrial mill, which is suitable for various mineral powder preparation and coal powder preparation. According to the needs of the market, the fine powder processed by the mill can be arbitrarily adjusted between 325-3000 mesh, and the output can reach 0.5-12 tons per hour. The baryte mill machine is a three-dimensional structure with the advantages of small footprint and strong setness, and the fineness of the finished product is uniform. The appropriate equipment can be selected according to its actual situation.