Maintenance of fragile parts of shredder

As a kind of destroying equipment in mechanical industry, waterproof operation is particularly important. If the shredder appears abnormal dynamic or static phenomena in the process of operation, we should shut down the shredder in time, and then turn it on after checking and removing the fault. This can also avoid the occurrence of electric leakage of shredder. If the important parts of the shredder are rusty, such as bearings, then we should pay attention to it, which may lead to the operation efficiency of the shredder to slow down. And the conflict becomes bigger, simple to form wear and tear inside the shredder, at this time we need to remove rust, and then add lubricant to protect, real rust severe local, shredder protection work to do a good job, cost-effective products are more popular with the market. Customers are demanding more and more on the quality of products, at the same time, they also put forward higher requirements on the after-sales service of products. We should pay attention to when using the double-axis shredder: in the production process of the double-axis shredder, the working environment of the reducer should be kept at the appropriate temperature, and the detailed specification should be - 10 ~40 C. As for mechanical products, waterproofing is often an important operation. In addition to avoiding accidents of mechanical parts and water oxidation, it can also avoid the occurrence of leakage of electricity. As a kind of destroying equipment in mechanical industry, waterproof operation is particularly important. Tearing machine mainly acts on a variety of materials, such as tyres, rubber, wood, cans, waste electrical appliances and other information damage, with a high tearing ability. The shredder is mainly used for electricity. Therefore, when the shredder is used for operation, the position of the shredder is always right and wrong.